Drum Carder Cloth, Stainless steel - PER INCH
NOTE: Due to popularity, this product may take up to two weeks for delivery.
Because this is a special product cut to the ordered length we do not accept returns if errors of measurement are made by the customer. NOTE: Not all drum carders are the same and will require a precise measurement of cloth size. If you are not familiar with replacing your drum carder cloth, please make sure that you discuss with someone who has knowledge of replacing them.
Normally for most fibres the 72 point is the best all rounder.
Total width of backing cloth - 215mm (8.5 ") Wire width - 180mm (7") Rubber border / side margin - 16mm This margin is often trimmed back to 10mm or less when mounted on the drum
Wire setting 72 points per square inch. The general type most used.
To calculate the amount you'll need we suggest you multiply the diameter of the drum by 3.142. We always add a little bit extra for free to allow space for making the join.
Card cloth is normally fixed to the drum by staples or tacks along the edges only. A joining line, often made of a thin strip of metal, will not only fix the cloth but also provides a space allowing the carded batt to be removed when you've finished.